 |
When a Velta pipe in floor heating system is
supplied, it will usually depending on type of construction) consist of
the following materials:
Velta Plus Pipe 17 x 2mm (VPEa PEX 151) to DIN 4726 standards
Purpose designed high-pressure cross-linked polyethylene with integral
oxygen diffusion barrier to minimise oxygen diffusion across wall of pipe
and reduce corrosion risk to any ferrous items in the heat source or radiator
system that may also be fitted.
Edge Insulation Strip 12mm thick x 130mm high. For use as perimeter
expansion joint. 20 metre rolls.
Thermal & Sound Deadening Insulation
50mm EPS Insulation or 25mm Celotex TS2 depending on construction -
Please contact us to discuss your specific requirements.
Polyethylene Isolating Film
Fitted between the insulation layer and reinforcing grid to prevent screed
bridging down to subfloor level, 0.2mm thick - 75m2 rolls.
Pipe Support and Screed Reinforcing Grid
For pipe spacings of 300, 200 &100mm. 3mm dia mild steel wire. with
unique 'Stand-Off feet' to ensure complete pipe encapsulation by screed,
painted finish, size 2.15 x 1 .25 m2.
Velta Wire Grid Binders
To tie reinforcing/support grids together, looped both ends for easy tying.
Packs of 100.
Velta Pipe Clips
To clip pipes to support grid. Unique scissor action ensures rigid pipe
fixing. Packs of 500.
